A Complete Roofing System for a Lambertville Home
Project Status: Completed
A roof replacement is a short stretch of loud work measured against years of wind, rain, summer heat, and freeze-thaw cycles. At this residence in the City of Lambertville, part of Hunterdon County, Lemus completed a full roof replacement designed to renew the entire protective system, not simply cover the existing shingles.
The scope moved in a disciplined sequence: protect the property, remove the worn roofing, inspect the exposed deck, prepare vulnerable edges and transitions, then install a new roof using materials from GAF. Each layer had a job. The finished shingles were only the part visible from the ground.
Preparing the Property and Removing the Old Roof
Before tear-off began, the crew established a controlled work zone around the home. Landscaping, walkways, siding, and access points were protected while the existing roof covering was removed. Keeping debris contained during demolition made the site safer and allowed the team to maintain a cleaner path through the installation.
Inspecting the Exposed Roof Deck
With the old material off, the roof deck could be reviewed directly. This is the moment when soft areas, irregular surfaces, and previous repair conditions can be addressed instead of buried beneath another layer. A sound, properly prepared deck gave the new roofing system a stable base.
Installing the GAF Roofing Components
The replacement system was built using GAF roofing materials selected for the home. Underlayment, edge protection, shingles, and ridge components were installed as coordinated parts of the assembly. Consistent layout and fastening helped create the clean courses and balanced finished profile visible from the street.
Detailing Flashing, Valleys, and Ventilation
Roof systems usually fail at transitions before they fail in the middle of an open field. Valleys, wall intersections, penetrations, and roof edges were handled with close attention to drainage and water shedding. Ventilation components were incorporated into the work so the roof could perform as a complete assembly above and below the deck.
Finished Protection Without the Construction Hangover
The last step was a detailed cleanup and final review. Loose debris was removed from the property, the completed roof was checked, and the home was left with a sharper exterior line and renewed protection overhead. The result is a practical exterior upgrade that also gives the house a cleaner architectural finish.
Planning a roof replacement for your home? Contact our residential division at GoLemus.com to get your next project moving.